A Selection of Colours Cut Vinyl

Many installations can benefit from using cut vinyl for lettering, logos or images. We are able to provide cut vinyl for signs, site boards, windows, vehicles and much more.


All cut vinyl can be wiped clean so you are able to keep it looking fresh and new for a long period of time.


If you are after any advice regarding this product then please don’t hesitate to get in touch, we will be more than happy to offer our advice and expertise.


Vinyl Swatches


If you are after some vinyl but not sure of the colour, we will be more than happy to provide a range of swatches, just get in touch!

The Process
Stage 1 - Weeding

The vinyl is cut out, excess vinyl is removed from around the graphics.

Stage 2 - Application Tape

A carrier is then applied to the front of the vinyl ready for application.

Stage 3 - Remove Backing

The backing sheet is then peeled away to reveal the sticky back of the vinyl.

Stage 4 - Apply Vinyl

The vinyl is then positioned where needed and imperfections such as air bubbles are smoothed over with an applicator.

Stage 5 - Peel off Application Tape

Finally the carrier sheet is peeled away leaving the vinyl in place.

©2018 Approved CS